POLYCOAT 1C
Aromatic polyurethane liquid. One component, cured by atmospheric humidity.
Solution Characteristics :
* Newtonic viscosity
* High wetting characteristics,
* High penetration strength
Usage :
* Colored or transparent types can be applied on almost every type of floor,
* On protective coatings,
* In areas where resistance to certain mild chemicals is required,
* Can be used as a primer to Polycoat - 2 C to give better adherence,
* In areas where non slip surfaces are required, (special formulation is used)
* For repairing old worn concrete surfaces,
Application :
* It is advisable to use the content of the whole opened package,
* Leftover material can be repacked in airtight containers and stored in a very cool area.
* Stir well the content of the package before using it,
* Apply with a roller or a brush,
* Apply on dry non humid clean surfaces,
* Package should not be left open for a long time,
* depending on weather conditions and surrounding temperatures ,the prepared mixture should be used between 15 -
45 minutes
* Thin layers should be applied max 200 g/m² in one layer and leave to dry, repeat If a thicker layer is required,
* Special thinner can be used for thinning POLYCOAT-1C if necessary,
* Even though POLYCOAT - 1C will dry in 3-6 hours on the applied surface ,but final strength will only be reached
after 24-48 hours therefore preferably no traffic should be allowed on that surface for a couple of days .
|
